Post 122467 by T-5ones on 2006-07-06 15:28:30
I hope this works...
As promised here are a few pics of the tank. Better late than never.
Polished bliss are to blame for me skiving for 3 days instead of getting any work done! But the reslts are no too bad. (IMO)
No mods to date but there is a RICA over the horizon, somewhere.
Tim
http://s69.photobucket.com/albums/i58/T-5ones/
Post 122470 by T5ER on 2006-07-06 15:31:01
Lovely looking motor mate hope you have many happy years together
Post 122471 by T-5ones on 2006-07-06 15:32:08
Cheers mate, appreciated!
Post 122494 by Wobbly Dave on 2006-07-06 16:20:11
What did PB do/you do to the old gal - wash/clay/polish/wax?
Any particular products?
Post 122504 by Mrsmopp on 2006-07-06 16:39:28
Fire engine!!!
I'm a big fan of red volvo's so I am always going to be a little biased and say it looks fab!
x
Post 122505 by T-5ones on 2006-07-06 16:54:28
I'd have loved to get PB to do it but I get satisfaction out of doing it myself.
I washed with Jeffs auto body & lambswool waqsh mitt ( 2 bucket method, of course)
Poor boys waffle weave work towel, to dry.
Meguirs quick detail spray & clay bar - got rid of overspray from bumper on body and wheels, white paint spots all over car (probably from when in body shop)and usual tar spots. very good product. 2nd waffle weave towel used.
Menzerna final polish II by machine. Very good polish which removes all polishing swirls with out any paint residue on pad. Wished I had also got the slightly harsher stuff to remove slightly deeper scratches.
Menzerna Full Mlecular Jacket by hand, 2 coats then a third next day. Buff with Poorboys thick n plush towel
Remove, clean and wax wheels, turtlewax extreme cleaner and also the wheel wax. Blackfire Long lasting Tyre gell - very good product.
Poorboys trim restorer on external trim-2 coats.
Finally packed all kit neatly away and washed...;)
Post 122514 by T5SLAVE on 2006-07-06 17:16:55
Crackin effort m8, looks very nice indeed! I especially like the beading water close up, very arty!
Post 122518 by T-5ones on 2006-07-06 17:26:51
Cheers all.
[QUOTE]I especially like the beading water close up, very arty!
[/QUOTE]
Arty farty, it goes with the job.
Post 122704 by Wobbly Dave on 2006-07-07 00:25:40
Nice work. When I get my P/C from the states - arriving soon I hope - I will be getting stuck into the swirls. Still not sure which polish to use. Merzena IP seems to come high on the list as does the old Megs 80/83 combo.
Complete novice at this.
Gonna do a complete reclay (last one done after the bbq) and start from there. Most of my stuff is chemical guys based. Intending to finish with CG glaze, Sealant then XXX hardcore paste wax.
Was very impressed with the rim wax - washing wheels is sooo easy now.
Post 122776 by T-5ones on 2006-07-07 12:13:31
Although Rich from P.Bliss is busy he will answer answer email questions in the evening regarding different cut and grades of polishes.
I have found that althought the new polishes "degrade" in use, making the particles finer towards the end of the buffing, its best to have a moderate cut and then use a very fine cut to buff/finish off the shine.
Enjoy the new tool, they save soooooo much muscle.