Code reading on a 95 850

Posts

Post 582517 by T5frankie on 2013-03-09 19:50:57

How is it done without the led lights or an obd2 plug?

Post 582521 by claymore on 2013-03-09 19:54:09

[QUOTE=T5frankie;582517]How is it done without the led lights or an obd2 plug?[/QUOTE] it must have one or the other?

Post 582526 by Gregor on 2013-03-09 19:59:23

It says in the volvo service books if you don't have LED or OBD you can use the volvo scan tool (998-8686) connected to volvo data link connector (DLC) in engine bay

Post 582528 by T5frankie on 2013-03-09 20:01:09

[QUOTE=claymore;582521]it must have one or the other?[/QUOTE] you know the obd2 dont work on 850's, my brothers m reg has the led lights, mine doesnt

Post 582610 by kyboy on 2013-03-09 21:52:56

Same here mate!

Post 582646 by T5frankie on 2013-03-09 22:58:57

Anyone?

Post 582658 by MoleT-5R on 2013-03-10 00:04:21

you can get flash codes out of the obd2 socket using a 12volt led and 3 wires, seem to remember a thread on voc but don't have a link at present, have done this on mine once or twice but can't remember which pins to flash, will do a bit of research tomorrow mate

Post 582662 by shepbomb on 2013-03-10 00:22:22

Do u have a PIC of the socket Frankie, my 850 let's me use obd2 or fcr

Post 582663 by T5frankie on 2013-03-10 00:24:59

I take it's under the coin slots?

Post 582668 by t5steve on 2013-03-10 01:18:26

if its anything like mine it will be a nightmare to read......................stealers couldn't read it...........local independants couldn't read it...........my son works at a vauxhall/everything else dealers and they couldn't read it...................ended up with a £10 cheapy from e-bay..........works perfectly

Post 582672 by Redbrick on 2013-03-10 08:09:25

http://www.volvoforums.org.uk/showthread.php?t=83895