Post 602668 by deliverydriver_dan on 2013-05-04 14:29:39
hi all what are the size of the speakers in the 850 estates 1996 model
Post 602672 by T5frankie on 2013-05-04 15:42:13
about 15 inches lol, well my one is
Post 602673 by p fandango on 2013-05-04 15:46:43
[QUOTE=T5frankie;602672]about 15 inches lol, well my one is[/QUOTE]
only 1 bah
you won't be able to fit aftermarket speakers in without the use of adaptors, i made my own & used 5's in the doors. Autoleads do the bits you need
Post 602702 by t5 pete on 2013-05-04 18:01:12
No matter what speakers you go for in the estate it will rattle like mad its not just a case of turning it up as the louder it is the worse it vibrates the car bl00dy estates
Post 602706 by p fandango on 2013-05-04 18:07:15
[QUOTE=t5 pete;602702]No matter what speakers you go for in the estate it will rattle like mad its not just a case of turning it up as the louder it is the worse it vibrates the car bl00dy estates[/QUOTE]
my saloon never rattled :)
Post 602709 by t5 pete on 2013-05-04 18:12:16
It wont now pedro theres next to nothing left of it appart from the shell lol
Post 602777 by Brett855tdi on 2013-05-04 20:42:34
You can get after market speekers to fit.... ive fit sony xplode and jbl gto they just have a funny hole pattern and need proper universal holed ones (not just 4 equal gaped holes) i think they were 15cm in the front doors for sure.
I put some tweeters on the wing mirror covers and with what was in the boot with the 6x9s in boxes facing forward.... sounded awsome
Post 604076 by Nifton on 2013-05-09 11:45:29
I've got some 15 inch FLI 3 way in the rear, got them to fit the OEM cone houseing with a couple of tap screws and some silicone seal as i think the rears are 16, works like a charm. I have 15inch pioneer in the front which fit just fine, again with some tapping screws to hold where the lugs don't match the holes.
The main issue I'm having is finding some decent composit tweaters to replace the front and rear pillars. Any suggestions?
Post 604078 by T5frankie on 2013-05-09 11:49:15
[QUOTE=Nifton;604076]I've got some 15 inch FLI 3 way in the rear, got them to fit the OEM cone houseing with a couple of tap screws and some silicone seal as i think the rears are 16, works like a charm. I have 15inch pioneer in the front which fit just fine, again with some tapping screws to hold where the lugs don't match the holes.
The main issue I'm having is finding some decent composit tweaters to replace the front and rear pillars. Any suggestions?[/QUOTE]
Sure you don't mean 15cms? LOL
Post 604079 by p fandango on 2013-05-09 11:54:33
[QUOTE=Nifton;604076]I've got some 15 inch FLI 3 way in the rear, got them to fit the OEM cone houseing with a couple of tap screws and some silicone seal as i think the rears are 16, works like a charm. I have 15inch pioneer in the front which fit just fine, again with some tapping screws to hold where the lugs don't match the holes.[/QUOTE]
i think you mean 5inch not 15's, these are 15's & they won't fit in the doors lol
