Post 687111 by Thanatos on 2014-02-04 21:16:38
yeah my shoes end up in most pics being size 13
the mirrors really spruce the front end of the car up
Post 687119 by abdul on 2014-02-04 22:58:58
Have u got a ebay link to them
Post 687120 by Thanatos on 2014-02-04 23:03:35
Not now Abdul as it expired last night but they came from Germany in any case and were £30 dearer
Post 687121 by abdul on 2014-02-04 23:21:45
They are out of stock will order when available
Post 687128 by abdul on 2014-02-04 23:41:09
[QUOTE=Thanatos;687126]Blackpool Abdul
They have the chrome ones on ebay Abdul
A bit of bling for the laser ones
http://www.ebay.co.uk/itm/Spiegelkappen-chrom-Volvo-850-S40-V40-S70-V70-/291057379425?pt=DE_Autoteile&hash=item43c45f2861[/QUOTE]
A bit too much bling
Post 687129 by abdul on 2014-02-04 23:42:35
They definitely give the car a modern look
Post 687135 by V70 Graham on 2014-02-05 05:24:56
Nice, not seen these before.
Post 689675 by abdul on 2014-02-15 20:04:30
Disappointed that they dont fit
Post 689677 by Thanatos on 2014-02-15 20:21:27
i was gutted i now looking for a lhd breaker to see if i can get them to fit
Post 689685 by V70 Graham on 2014-02-15 20:43:58
Shame, looked a nice little mod.
Post 689912 by partsforvolvos.com on 2014-02-17 11:29:15
sorry to see that you have found the answer to the question I was just about to ask ......
they only fit LHD.
I have some of these in stock if anybody is interested and found the same thing. the angle of the mirror body is different.
I asked the supplier if it might have been a moulding fault , but this was the reason I traced it to.
you could modify the existing housing, and put in the led repeaters if you cut it very carefully?
Post 689937 by Thanatos on 2014-02-17 17:19:13
modding the RHD ones to fit is going to be a last resort as these are slightly moulded where the led's are and the screw holds the leds in to the housing isn't available on the Normal Housings either
getting hold of a set of LHd Mirrors To Pack a side of the Motor mount out to make the Mirror angle useable on a rhd car
Post 695204 by Thanatos on 2014-03-15 19:38:57
and now the finished look
and a short video
[video=youtube_share;yRhBfe0Xhwo]http://youtu.be/yRhBfe0Xhwo[/video]
here they are ready for primer lens's removed
and now with 2 coats of primer ready for top coat
and the first of many topcoats
well today they got 5 layers of topcoat and 6 layers of laquer and i have refitted the leds
and a test fit on the car
well iwas going to splice the left hand indicator into 24/2e-15 and24/2e-14 for the right this is the white 19pin plug on the firewall above the drivers pedals which might be a bit easier then my first thoughts after looking at the wiring diagrams
